HOME | MY ACCOUNT | HELP
PRODUCT SEARCH   
Select from one of the following common questions:






Setting Up Your Ground Blind

Setting up your Primos Ground Max Hunting Blind is Easy.
  • Step One: Remove your blind from the carry bag and unclip the tie strap. See Figure One.
  • Step Two: Spread the corners of the blind out (fig. 2) and flip it open so you see the center hub on the top of the blind.
  • Step Three: Firmly pull the cord attached to the center hub until the top pops out (fig 3 & 3a).
  • Step Four: Lift the top of the blind so you have access to the center hub on one of the walls and firmly pull the hub until the wall pops out (fig. 3 & 3a)
  • Step Five: Continue around the blind, pulling the hubs one at a time until all of the walls are set up. -- Your Blind should now be standing square at the end of this step.
  • Step Six: Use stakes to secure your blind to the ground. Secure your high wind tie downs. (fig. 4)
  • Step Seven: Adjust your windows to your liking. Add native brush to your blind to optimize your camouflage.

- Back to Top







Taking Down your Ground Blind

Taking Down your Primos Ground Max Hunting Blind is Easy.
  • Step One: Remove any native brush prior to folding down or damage may occur
  • Step Two: From the outside of your blind, zip all the windows shut, but leave the door unzipped.
  • Step Three: Remove all stakes from the ground and store them in the built-in pouch located inside the zippered door. (Fig. 5 & 5a)
  • Step Four: With your hand, push on the hub in the center of one of the walls until the tension releases.(fig. 6 & 6a)
  • Step Five: Repeat step 4 on the remaining walls; the blind will begin to collapse on itself.
  • Step Six: Now that all the walls are collapsed, with your hand, push on the center hub of the roof until the tension gives.
  • Step Seven: Fold the corners all to one side; you can now see the hubs all together along with the reverse side of the fabric. (fig. 7)
  • Step Eight: Gather the corners of the blind together and secure with the strap that is attached to the blind. Pull the strap snug. (fig. 8)
  • Step Nine: Place the blind in the carry bag with the hub end going into the bag first.
  • Step Ten: Store in a cool, dry place.

- Back to Top










PRODUCTS  |  TV & VIDEO  |  COMMUNITY  |  COMPANY  |  RESOURCES  |  CABIN CHAT  |  HOT SHOTS  |  CONTACT US